Извините пожалуйста ошибки.
Страница в оброботке.
Keep your data safe on an industrial CF card Apacer
For a safe storage of valued data in demanding industrial conditions, a reliable medium is necessary. APACER comes with the fifth generation of Compact Flash cards Industrial CF5 and CF5 Plus.
A card is designed to meet stringent demands for a data reliability and a write
protection. Simple locking of lock switch on a bottom side allows data to be
read only, thus protected from an accidental deletion and/or tampering of
confidential information. APACER CF 5 and CF 5 Plus are compliant with a CFA 4.1
specification. Used SLC chip (single level chip) and an intelligent power
failure recovery system contribute to a card reliability. To keep data correct,
CFC 5 supports 24 bit hardware ECC function ( error checking and correction),
advanced wear-leveling and block management, and S.M.A.R.T. (Self-Monitoring,
Analysis and Reporting Technology). Transfer mode is up to PIO-6, multi-word
DMA-4 and Ultra DMA-5. They are available in a standard working temperatures
range 0 to +70°C and also in extended range -40 to +85°C. Among outstanding
features of cards CFC 5 belong also a high resistance to humidity, shocks and
vibrations. All these advantages make memory cards APACER CFC 5 a CFC 5 Plus
ideal for embedded devices in a medical, military and automotive segments, as
well as there, where the highest level of reliability and data safety is
required. Further information will provide you the
Apacer CF5 datasheet.
Advantages / Features:
- industrial Compact Flash card CFA 4.1 compliant, SLC chip
- lock switch for a write protection
- data transfer up to PIO-6, Multi-Word DMA-4, Ultra DMA-5
- sequential read/ write - 40/30 MB/sec
- 24 bit ECC and Advanced wear-leveling and block management
- available in capacities 128 MB – 16 GB specified for temperatures 0 to +70°C and
-40 to +85 °C
- standard 50-pin connector
20111228012.1.2012КомпонентыSOS electronic s.r.o.